Author Topic: ForeveRun Motor 201-AT131 brake pads if you want them  (Read 1057 times)

0 Members and 1 Guest are viewing this topic.

Jim Dettman

  • Senior Member
  • All pro
  • *
  • Posts: 1139
    • View Profile
    • Email
ForeveRun Motor 201-AT131 brake pads if you want them
« on: July 01, 2015, 08:03:12 am »
Have some ForeveRun Motor 201-AT131 brake pads if you want them.

These are the ones:
http://www.ebay.com/itm/ForeveRun-Motor-CU-Sinter-Metal-Ceramic-Brake-Pads-201-AT131/141682305338?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D31190%26meid%3D38d06c114f8a442aad2ccaa124a367f0%26pid%3D100011%26rk%3D1%26rkt%3D1%26sd%3D141626295968

 Not sure what they fit.  Ordered pads for my Honda's and they were not the right ones.   Think they fit CBR's, but not sure.

 From the center of the hole where the pin slides through to the mount tab on the other side, they are 2 11/16" in length.  Width is approx 1".

 If you think you can use these, their yours.   Just need to figure the easiest way to get to whoever.   I have two sets of these.

Jim.
2009 CRF250x /2009 CRF450x